ReiderBianco413

From CCCWiki
Revision as of 09:59, 29 March 2013 by 173.237.182.86 (talk) (Created page with "Within our past articles I discussed all the measures required to properly replace your old wood sash windows with energy efficient vinyl windows. I told you just how to measure ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Within our past articles I discussed all the measures required to properly replace your old wood sash windows with energy efficient vinyl windows. I told you just how to measure for the brand new windows. Then we discussed the removal of the wood sashes and parting bead. Finally, I told you how exactly to deploy, seal, and cut the plastic replacement windows. But, what if these old windows in your house are constructed of aluminum in the place of wood? Is the process exactly the same? No, it is different at all. Therefore, another few articles are going to explain the differences between replacing wood windows versus metal windows.

I explained the difference between new building frames versus replacement frames, when discussing the proper frame type for replacing the wood sash windows. There's still another alternative we've to take into account regarding shape style, when changing aluminum windows. It is called a "retrofit" body. Let us go over each frame type. First, we have the new construction shape with the nailing fin. If you choose to go this route, you've to remove the exterior around each window opening, take out the nails holding the aluminum window to the guys, nail in the new vinyl window, implement blinking, caulk, and re-install the exterior around each window.( I get tired just speaing frankly about it! )In addition to being truly a great deal of job, you can run into major problems attempting to install the exterior product around each window opening. If your house has stucco, you have to test and fit the remaining portion of the stucco. It could be done, but not by you. Also most professional stucco folks can't obtain a perfect match. What if you've wood siding? Well, you can lower away 2" of the siding around each window to access the nail fin, then you can use 1 X 2 or 1 X 3 cut around each window. Definitely not as much work whilst the stucco home, but possibly more work than the common homeowner cares to tackle. Imagine if each window is surrounded by stone? Let's not go there! When done you would need certainly to take away the bricks, then re-install them all.

Trust in me, you do not want to change your old aluminum windows with new construction vinyl windows. You want to use both the replacement frame such as the one used to displace the wood sash windows, or anything called a frame, that is popular in the west where stucco is a common exterior. Because the procedure for measuring could be the same regardless of the frame type chosen, this short article will examine the correct measuring procedure, and future articles will explain the difference in the installation process for alternative versus retrofit.

You will see three split "legs" that form two pockets, if you look at the portion of the aluminum frame that goes around the window opening in to your surrounding walls. The guts leg and the exterior leg form the initial pocket. Your screen and stationary cell is likely to be in this pocket. The middle leg and inside leg form the second pocket, and your sliding panel is in that pocket. Get the "leg" that is the largest on all four sides. Run your tape measure from the leg on the left to the leg on the right, when measuring the size. This would be the narrowest description. Then, subtract 3/8" from that dimension. This is the size of the replacement window. Assess the height the same way. When measuring the height, measure as near the middle of the screen as possible. This really is especially crucial on windows wider than six feet, since the leading wood header tends to drop with time, making the middle of the opening the narrowest. You don't need to take 3/8" from the top like you did on the size. 1/4" is fine. They're the measurements you employ when purchasing your plastic screen. When you have any image windows( windows with no vent screen), there is only going to be two legs and one pocket. The same way is still measured by you.

A few weeks I'll examine whether your property is just a candidate for retrofit structures or alternative frames..

David Rocco has been installing

Alternative windows since 1978

For more information, visit Just How To Install WindowsWooden Window Inc 111 Rhode Island St San Francisco, CA 94103 (415) 357-1370 http://woodenwindow.com

Wooden Window, Inc 1900 South Norfolk Street San Mateo, CA 94403 (650) 239-5239 http://woodenwindow.com window manufacturer